A Review on Sludge Drying after High Pressure Filter Pressing
DOI:
https://doi.org/10.54691/wpgya346Keywords:
Sludge Drying; Low Temperature Drying; Heat Pump Drying; Environmentally Friendly.Abstract
Sludge drying is a key step in municipal sludge treatment. After mechanical dewatering, the water content of sludge is usually between 50% and 70%, which needs further drying. The main drying technologies include thermal drying, solar drying, ultrasonic drying and microwave drying, among which thermal drying technology is the most mature. Research shows that low-temperature drying technology has obvious advantages in reducing the release of harmful substances, energy consumption and cost. In terms of technology application, domestic sludge drying process is mainly divided into direct drying and indirect drying. Direct drying directly evaporates water through high-temperature gas, while indirect drying makes use of heat conduction effect to contact with high-temperature media. At present, indirect drying technology is mainly used in China, such as paddle type, disc type and thin layer drying. In particular, the low-temperature heat pump drying technology excels in terms of safety, footprint and energy consumption, with its ability to operate at lower temperatures, reduce the release of hazardous gases, and achieve environmental and economic benefits in a closed-cycle mode. This technology is suitable for small and medium-sized wastewater treatment plants and shows clear advantages in cases of budgetary constraints.
Downloads
References
[1] Dai Xiaohu. Current situation and development trend of sludge treatment and disposal in China[J]. Science,2020,72(06):30-34+4.
[2] Chen Z, Afzal M T, Adam A, et al. Microwave drying of wastewater sewage sludge[J]. Journal of Clean Energy Technologies, 2014, 2(3): 282-286.
[3] Ruiz T, Wisniewski C. Correlation between dewatering and hydro-textural characteristics of sewage sludge during drying[J]. Separation and Purification Technology, 2008, 61(2): 204-210.
[4] Lyu, Lukai and Chen, Shaoqing and Wang, Fei. Research on Sludge Drying Characteristics in a Double-Axis Paddle Dryer by Coupling Markov Chain and Penetration Theory[J]. Waste and Biomass Valorization, 2022, : 1-19.
[5] WWang, B., Q. Zhang, X. Zhang,T. Liu. A Novel District Heating System Coupled with Reclaimed Water Source Heat Pump: Energy, Economic, Environmental, and Application Analysis[J]. Energy Technology, 2022, 10(10).
[6] LI Jinping, HU Yunjiao, CHEN Siqi, et al. Morphological transformation and stabilization characteristics of heavy metals Pb, Cu and Zn during sludge thermal drying[J].
[7] Eddie Chu, Benzene and phenol in sludge and their release characteristics [D]. Hangzhou:Zhejiang University 2009.
[8] XU Zhixin, LAN Mei, SUN Wenye. An analysis of sludge thermal drying technology [J]. Municipal Technology,2016(1):124-127. 7.
[9] Zhentao Zhang, Luwei Yang, Yanhua Dong, et al. Prospect of heat pump dehumidification and drying technology application[J]. High Technology and Industrialization,2014(5): 70-73. 8.
[10] ZHANG Yi, HAO Shujiang, ZHANG Qian. Application of heat pump low temperature drying technology in the field of industrial sludge deep reduction [J]. Construction Machinery and Maintenance,2017(7):97-99. 9.
[11] Cai J , Zhou H , Zhang T , et al. Sensitivity analysis of structural parameters of a low-temperature heat pump sludge drying system[J]. Applied Thermal Engineering, 2022, 207:118172.
[12] LIANG Huajie,WANG Jie,MENG Jianguo,et al. Analyze the performance of low temperature drying equipment for sludge production and operation--Take the sewage treatment plant in a city's economic development zone as an example[J].
[13] treatment plant as an example[J]. Smart City,2019,5(15):131-132.ZHOU Wenbin, CHEN Li, TONG Shihan. Application of sludge low temperature drying equipment in municipal sludge dewatering[J]. China High-Tech,2017 (12):70-72.
Downloads
- Views: 12 | Downloads: 5 PDF
Published
Issue
Section
License
Copyright (c) 2024 Frontiers in Science and Engineering
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.