Microstructure Analysis of Cold Sprayed Nickel-based Silicon Carbide Composite Coatings
DOI:
https://doi.org/10.6919/ICJE.202408_10(8).0010Keywords:
Metal-ceramic Composite Coatings; Sic; Microstructure Analysis; Mechanical Properties; Wear Resistance; Friction Mechanism; Ceramics.Abstract
In this paper, a systematic study of cold sprayed nickel-based silicon carbide coatings was carried out in terms of microstructure, deposition mechanism, microstructure and strengthening mechanism. The results show that the area share of SiC particles on the three coating cross sections was about 1.8%, 4%, and 6.5%.The maximum average hardness of the coating reaches 339.31 HV1 and the maximum average bond strength reaches 23.665 MPa. The cold spraying technology significantly reduces the problems of poor bonding and high porosity caused by the significant difference in the coefficient of expansion of ceramics and metal, and improves the performance parameters of the coating to a certain extent. Through the detailed analysis of the powder deposition mechanism and in-depth discussion of the principle of ceramic particle refinement, the role of ceramic particles in the coating strengthening process was analyzed.
Downloads
References
Liu Futian, LI Zhaoqian, HUANG Faxing. Cermet composite coating technology [J]. Journal of University of Jinan(Science and Technology), 2002, 16(1): 84-91.
Li Zhaotong. Microstructure and properties of laser cladding AlCoCrFeNi-M_x high entropy alloy coatings [D]. Journal of Shandong Jianzhu University,2023.DOI:10.27273/d.cnki.gsajc.2023.000655.
Wang Wanqing, Xiong Chengtao, Gao Jianhong, et al. Cold spray technology development history, trends and challenges [J]. Materials China,2024,43(04):273-280+300.
Hassani-Gangaraj M, Veysset D, Nelson K A, et al. In-situ observations of single micro-particle impact bonding[J]. Scripta materialia, 2018, 145: 9-13.
Hassani-Gangaraj M, Veysset D, Nelson K A, et al. Impact-bonding with aluminum, silver, and gold microparticles: Toward understanding the role of native oxide layer[J]. Applied Surface Science, 2019, 476: 528-532.
Grujicic M, Zhao C L, DeRosset W S, et al. Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process[J]. Materials & design, 2004, 25(8): 681-688.
Assadi H, Gärtner F, Stoltenhoff T, et al. Bonding mechanism in cold gas spraying[J]. Acta materialia, 2003, 51(15): 4379-4394.
Hassani-Gangaraj M, Veysset D, Nelson K A, et al. Supersonic impact of metallic micro-particles[J]. arXiv preprint arXiv:1612.08081, 2016.
Shkodkin A, Kashirin A, Klyuev O, et al. Metal particle deposition stimulation by surface abrasive treatment in gas dynamic spraying[J]. Journal of Thermal Spray Technology, 2006, 15: 382-386.
Liu Jianyu, LUO Xiaotao, Wan Peng, et al. Methods for improving corrosion resistance of cold sprayed metal coatings [J]. Thermal Spray Technology,2023,15(04):1-17.
He L, Hassani M. A review of the mechanical and tribological behavior of cold spray metal matrix composites[J]. Journal of Thermal Spray Technology, 2020, 29(7): 1565-1608.
S. Yin, X. Suo, Y. Xie, W. Li, R. Lupoi, and H. Liao, Effect of Substrate Temperature on Interfacial Bonding for Cold Spray of Ni onto Cu, J. Mater. Sci., 2015, 50(22), p 7448-7457.
M.R. Rokni, S.R. Nutt, C.A. Widener, V.K. Champagne, and R.H. Hrabe, Review of Relationship Between Particle Deformation, Coating Microstructure, and Properties in High-Pressure Cold Spray, J. Therm. Spray Technol., 2017, 26(6), p 1308-1355.
T. Hussain, Cold Spraying of Titanium: A Review of Bonding Mechanisms, Microstructure and Properties, Key Eng. Mater., 2012, 533, p 53-90.
Y. Zou, W. Qin, E. Irissou, J.G. Legoux, S. Yue, and J.A. Szpunar, Dynamic Recrystallization in the Particle/Particle Interfacial Region of Cold-Sprayed Nickel Coating: Electron Backscatter Diffraction Characterization, Scr. Mater., 2009, 61(9), p 899-902. https://doi.org/10.1016/j.scriptamat.2009.07.020.
Van Swygenhoven H, Weertman J R. Deformation in nanocrystalline metals[J]. Materials today, 2006, 9(5): 24-31.
Zhang Zhijie, Su Congcong, Shao Zhaofeng, et al. Research status and prospect of cold spraying metallization of non-metallic materials [J]. Materials China,2024,43(02):102-114+123.
Wang Jiarui, Zhang Xiang, He Chunnian, et al. Research status and prospect of high conductive and heat resistant copper alloys and copper matrix composites [J]. Foundry Technology,2024,45(01):1-26.DOI: 10.16410/j.issn1000-8365.2024.3315.
Yang C. Preparation, microstructure and properties of nanometer Silicon carbide dispersion strengthened Nickel-based alloys [D]. Shanghai Institute of Applied Physics, Chinese Academy of Sciences, 2017.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.