Design and Optimization of the Shape of a Single-person Submersible based on ANSYS

Authors

  • Miaomiao Xiu
  • Junhai Liu
  • Baolong Peng
  • Zhanbin Zhang

DOI:

https://doi.org/10.54691/rskgbm20

Keywords:

Sea Cucumber Fishing; Single-man Submersible; Body-shape Design; Fluent.

Abstract

Due to the complex growth environment of wild sea cucumbers, the difficulty and low efficiency of traditional ROV identification, at present, wild sea cucumber fishing is mainly obtained through manual fishing, in order to ensure the life safety of divers and improve the fishing efficiency of sea cucumbers, new ideas and solutions for single-man submersibles suitable for shallow water operations are proposed. Under the condition of ensuring the driver's operating space, the shape and structure of an easy-to-process manned submersible are designed to optimize its resistance performance. Creo was used to establish a model of a single-man submersible for shape design, and three design schemes were proposed: scheme 1 flat spindle type, scheme 2 imitation unmanned boat type, and scheme 3 imitation airfoil type. The drag performance of the single-man submersible is simulated and analyzed by using the Fluent module in the analytical fluid dynamics simulation software Ansys, and the results show that the drag performance of scheme 3 imitation airfoil type is better than that of other schemes.The conclusion was verified by simple experiments.It provides effective reference information for the subsequent structural optimization of single-man submersibles.

Downloads

Download data is not yet available.

References

[1] Research on sea cucumber mariculture technology[J]. Wang Rusheng. Livestock and poultry industry, 2019(09).

[2] William K. MTS manned underwater vehicles 2017-2018 global industry overview [J]. Marine Technology Society Journal, 2018, 52(5): 125–151.

[3] Hu Zhen,Cao Jun. Development and application of manned deep diving technology[J]. Strategic Study of Chinese Academy of Engineering, 2019, 21(6): 87-94.

[4] Wang Lei,Hu Zhonghui,Jiang Lei, et al. Design and development of special submersible for deep-water detection of Yulong Dam[J]. Chinese Shipbuilding, 2022,63(05):157-166.

[5] Wang Qing,Zhang Min,Li Deshun, et al. Optimized design of wind turbine airfoil shape based on low-speed pretreatment[J]. Acta Solaria Sinica, 2022,43(05):351-358.

[6] Feng Kangjia,Hu Fanglin,Liu Le. Analysis of influencing factors of CFD simulation of plane motion mechanism test[J]. Ship Engineering,2020,42(04):44-48.

[7] Zou Lei,Tian Wei,Lin Yuan, et al. Study on the hydrodynamic characteristics of propellers based on different turbulence models[J]. Ship Engineering, 2023,45(12):94-100+114.

[8] Liu Fanghua,Yao Rao. Analysis of hydrodynamic performance of unmanned underwater vehicles[J]. Ship Science and Technology,2022,44(12):76-82.

Downloads

Published

2024-09-01

Issue

Section

Articles

How to Cite

Xiu, Miaomiao, Junhai Liu, Baolong Peng, and Zhanbin Zhang. 2024. “Design and Optimization of the Shape of a Single-Person Submersible Based on ANSYS”. Scientific Journal of Intelligent Systems Research 6 (8): 15-23. https://doi.org/10.54691/rskgbm20.