The Evolution of Logic Device Technology in the Post-Moore’s Law Era: From Advanced CMOS to Carbon-Based Transistors
DOI:
https://doi.org/10.54691/n8986w65Keywords:
Post-Moore’s Law Era; Advanced CMOS; Carbon Nanotube Field-effect Transistors; Logic Devices; Monolithic Three-dimensional Integration.Abstract
As integrated circuit manufacturing processes continue to advance towards the nanoscale, the traditional development model of CMOS devices-which relies on scale-down to enhance performance-is increasingly being constrained by factors such as the short-channel effect, rising power consumption, and material performance limitations. The continued evolution of Moore’s Law thus faces new challenges. The development of logic devices in the post-Moore’s Law era is gradually shifting from a focus solely on scaling down to a combined approach involving the optimisation of device structures and the exploration of new materials. On the one hand, advanced CMOS continues the development of silicon-based logic technology by enhancing gate control capabilities and integration density through structural innovations such as FinFETs, gate-all-around(GAA)transistors, and complementary field-effect transistors(CFETs); on the other hand, carbon nanotube field-effect transistors(CNTFETs), with their excellent carrier transport properties and the advantages of nanoscale electrostatic control, offer new possibilities for overcoming the scaling limitations of traditional silicon-based devices. This paper focuses on the technological evolution of logic devices in the post-Moore’s Law era, analysing the transition of advanced CMOS devices from two-dimensional to three-dimensional structures and the limitations encountered, whilst further discussing the current status and key challenges facing carbon nanotube materials, CNTFET devices, and carbon-based logic integration. Through a comparison of these two technological pathways, this paper concludes that the future development of logic devices will not involve replacing one technology with another, but will instead follow a trend of continuous optimisation of advanced CMOS alongside the synergistic development of new material-based devices.
Downloads
References
[1] Moore, G. E. (1965). Cramming more components onto integrated circuits. Electronics, 38(8), 114–117.
[2] Haensch, W., Nowak, E. J., Dennard, R. H., Solomon, P. M., Bryant, A., Dokumaci, O. H., Kumar, A., Wang, X., Johnson, J. B., & Fischetti, M. V. (2006). Silicon CMOS devices beyond scaling. IBM Journal of Research and Development, 50(4.5), 339–361.
[3] Cavin, R. K., Lugli, P., & Zhirnov, V. V. (2012). Science and engineering beyond Moore’s law. Proceedings of the IEEE, 100, 1720–1749.
[4] Iijima, S. (1991). Helical microtubules of graphitic carbon. Nature, 354, 56–58.
[5] Avouris, P., Chen, Z., & Perebeinos, V. (2007). Carbon-based electronics. Nature Nanotechnology, 2, 605–615.
[6] Hisamoto, D., Lee, W. C., Kedzierski, J., Takeuchi, H., Asano, K., Kuo, C., Anderson, E., King, T. J., Jeffrey, J., & Hu, C. M. (2000). FinFET-A self-aligned double-gate MOSFET scalable to 20 nm. IEEE Transactions on Electron Devices, 47(12), 2320–2325.
[7] Auth, C., Allen, C., Blattner, A., Bergstrom, D., Chikarmane, V., Ghani, T., Glassman, T., Han, W., Hattendorf, M., Jaloviar, S., Kencke, D., Kuhn, K., Lee, S., Liao, H., Luce, R., Lyons, J., Neirynck, J., Pandey, S., Park, J., & Young, S. (2017). A 10 nm high-performance and low-power CMOS technology featuring third-generation FinFET transistors. In 2017 IEEE International Electron Devices Meeting (IEDM) (pp. 29.1.1–29.1.4).
[8] Razavieh, A., Zeitzoff, P., Brown, D. E., & Nowak, E. J. (2019). Scaling challenges of FinFET architecture below 10 nm. IEEE Transactions on Electron Devices, 66(1), 3–10.
[9] Sakurai, T. (2018). Perspectives of nanosheet FETs for future CMOS scaling. IEEE Transactions on Electron Devices, 65(3), 842–850.
[10] Subramanian, S., Hosseini, M., Chiarella, T., Bardon, M. G., Dupuis, S., Parvais, B., Radisavljevic, B., Everaert, J. L., Ritzenthaler, R., & Horiguchi, N. (2020). First monolithic integration of 3D complementary FET (CFET) on 300 mm wafers. In 2020 IEEE Symposium on VLSI Technology (pp. 1–2).
[11] Tans, S. J., Verschueren, A. R. M., & Dekker, C. (1998). Room-temperature transistor based on a single carbon nanotube. Nature, 393, 49–52.
[12] Martel, R., Schmidt, T., Shea, H. R., Hertel, T., & Avouris, P. (1998). Single and multiwall carbon nanotube field-effect transistors. Applied Physics Letters, 73(17), 2447–2449.
[13] Cao, Q., Han, S. J., Tersoff, J., Franklin, A. D., Zhu, Y., Zhang, Z., & Haensch, W. (2015). End-bonded contacts for carbon nanotube transistors with low, size-independent resistance. Science, 350(6256), 68–72.
[14] Zhang, Z. Y., Liang, X. L., Wang, S., Yao, J., Lu, H., Shen, J., & Peng, L. M. (2007). Doping-free fabrication of carbon nanotube-based ballistic CMOS devices and circuits. Nano Letters, 7(12), 3603–3607.
[15] Qiu, C., Zhang, Z., Xiao, M., Yang, Y., Zhong, D., Peng, L. M., & Guo, S. (2017). Scaling carbon nanotube complementary transistors to 5nm gate lengths. Science, 355(6322), 271–276.
[16] Shulaker, M. M., Hills, G., Patil, N., Wei, H., Chen, H. Y., Wong, H. S. P., & Mitra, S. (2013). Carbon nanotube computer. Nature, 501, 526–530.
[17] Hills, G., Lau, C., Wright, A., Fuller, S., Bishop, M., Srimani, T., Ho, R., Amer, A., Stein, Y., Murphy, D., Arvind, F., Chandrakasan, A. P., & Wong, H. S. P. (2019). A modern microprocessor built from complementary carbon nanotube transistors. Nature, 572, 595–602.
[18] Bishop, M. D., Hills, G., Srimani, T., Lau, C., Murthy, A., Kanhaiya, P., Ho, R., Amer, A., Wright, A., Fuller, S., Chandrakasan, A. P., & Wong, H. S. P. (2020). Fabrication of carbon nanotube field-effect transistors in commercial silicon manufacturing facilities. Nature Electronics, 3, 492–501.
[19] Franklin, A. D. (2015). Nanomaterials in transistors: From high-performance to thin-film applications. Science, 349(6249), aab2750.
[20] Chen, Z., Chen, J., Liao, W., Zhao, Y., Jiang, J., & Chen, C. (2024). Progress on a carbon nanotube field-effect transistor integrated circuit: State of the art, challenges, and evolution. Micromachines, 15(7), 817.
[21] Cui, J., Wei, F., & Mei, X. (2024). Carbon nanotube integrated circuit technology: Purification, assembly and integration. International Journal of Extreme Manufacturing, 6(3), 032004.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Scientific Journal of Intelligent Systems Research

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.




