Kinematic Analysis and Path Planning of a Delta Parallel Manipulator for the Selective Harvesting of Premium Tea

Authors

  • Wei Tang School of Mechanical Engineering, Xihua University, Chengdu 610039, Sichuan, China
  • Changlin Song School of Mechanical Engineering, Xihua University, Chengdu 610039, Sichuan, China
  • Qin Huang School of Mechanical Engineering, Xihua University, Chengdu 610039, Sichuan, China
  • Junmin Li School of Mechanical Engineering, Xihua University, Chengdu 610039, Sichuan, China
  • Jun Bai School of Mechanical Engineering, Xihua University, Chengdu 610039, Sichuan, China

DOI:

https://doi.org/10.54691/17besg27

Keywords:

Delta Manipulator; Kinematic Analysis; Premium Tea Harvesting; Spatial Distribution; Path Planning; Trajectory Optimisation.

Abstract

The fine harvesting of premium tea is currently performed by hand and is therefore labour-intensive and inefficient. This paper presents a harvesting scheme based on a Delta parallel manipulator and investigates the kinematic behaviour and the harvesting path-planning problem of the mechanism. A kinematic model of the Delta manipulator is established, the forward and inverse position solutions and the velocity Jacobian matrix are derived, and the workspace and the distribution of singular configurations are analysed. On the basis of the spatial distribution of buds and leaves in the tea canopy, a spatial distribution model of the harvesting target points is established and the matching between the manipulator workspace and the harvesting region is evaluated. A hierarchical path-planning method is then proposed for the premium-tea harvesting scenario: the harvesting target points are partitioned into sub-regions by density clustering, a traversal path is solved within each sub-region by an improved ant colony algorithm, and the trajectory is smoothed and optimised subject to the kinematic constraints of the Delta manipulator. Simulation results show that, compared with conventional traversal planning, the proposed method shortens the total path length by 14.8 %, reduces the total harvesting time by 18.8 % and the maximum jerk of the trajectory by 34.1 %, and improves the computational efficiency by 72.1 %, and that it adapts better to the unstructured premium-tea harvesting scenario.

Downloads

Download data is not yet available.

References

[1] Yang, H. L., Zhong, Y., Jiang, Y. Z., et al. (2022). Hybrid strategy of trajectory planning for a parallel tea-plucking robot based on optimal time and jerk. Journal of Mechanical Engineering, 58(18), 212–221. (in Chinese)

[2] Wu, L., Liu, H., Ye, C., et al. (2024). Development of a premium tea-plucking robot integrating deep learning and machine vision. Applied Sciences, 14(13), 5748.

[3] Zhong, Y., Deng, F., & Li, M. (2021). Computer vision-based high-quality tea automatic plucking robot using Delta parallel manipulator. Computers and Electronics in Agriculture, 181, 105946.

[4] Gosselin, C., & Angeles, J. (1990). Singularity analysis of closed-loop kinematic chains. IEEE Transactions on Robotics and Automation, 6(3), 281–290.

[5] Zlatanov, D., Bonev, I. A., & Gosselin, C. M. (2002). Constraint singularities of parallel mechanisms. In Proceedings of the 2002 IEEE International Conference on Robotics and Automation (pp. 496–501). IEEE.

[6] Jia, J. M., Wang, D. Y., He, L. Y., et al. (2025). Research progress and prospects of the mechanical technology of premium tea-plucking robots. Transactions of the Chinese Society for Agricultural Machinery, 56(4), 1–18. (in Chinese)

[7] Huang, Z., Zhao, Y. S., & Zhao, T. S. (1997). Theory and control of parallel robot mechanisms. China Machine Press. (in Chinese)

[8] Chen, J. N., Yu, T. J., Jia, J. M., et al. (2026). Three-dimensional path planning method for tea bud plucking based on deep reinforcement learning. Transactions of the Chinese Society for Agricultural Machinery, 57(1), 68–78. (in Chinese)

[9] Dorigo, M., Maniezzo, V., & Colorni, A. (1996). Ant system: optimization by a colony of cooperating agents. IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics), 26(1), 29–41.

[10] Ester, M., Kriegel, H.-P., Sander, J., et al. (1996). A density-based algorithm for discovering clusters in large spatial databases with noise. In Proceedings of the 2nd International Conference on Knowledge Discovery and Data Mining (pp. 226–231). AAAI Press.

[11] Zhu, X. Q., Zhang, F., & Qin, Y. Q. (2020). High-order continuous trajectory planning of a Delta robot using quintic B-splines. Machine Design and Manufacturing Engineering, 49(6), 71–75. (in Chinese)

[12] Li, X., & Wang, J. (2018). Design of a four-DOF gantry tea-picking robot based on a DSP controller. Journal of Agricultural Machinery, 49(S1), 123–129.

[13] Wang, H., & Guan, Y. (2020). Trajectory tracking of a SCARA tea-picking manipulator using neural network adaptive compensation control. Transactions of the Chinese Society for Agricultural Machinery, 51(7), 34–41.

[14] Abhiram, S., & Kumar, A. (2021). Review on development of tea harvesting machines. Agricultural Reviews, 42(2), 137–145.

[15] Laribi, M. A., Romdhane, L., & Zeghloul, S. (2007). Analysis and dimensional synthesis of the DELTA robot for a prescribed workspace. Mechanism and Machine Theory, 42(7), 859–870.

Downloads

Published

2026-10-23

Issue

Section

Articles