Optimization of Point-Loaded Bragg Gratings based on Equivalent Apodization

Authors

  • Boyi Liang School of Electronic and Information Engineering, Beijing Jiaotong University, Beijing 100044, China

DOI:

https://doi.org/10.54691/462jj328

Keywords:

Integrated Waveguide Grating; Point-Loaded Bragg Grating; Apodization; Transfer Matrix Method; Equivalent Apodization Model.

Abstract

Silicon nitride integrated waveguides have attracted considerable attention in integrated photonic devices due to their low propagation loss, broad optical transparency window, and excellent compatibility with mature fabrication processes. Integrated waveguide gratings, as key components for on-chip wavelength selection and optical feedback control, play an important role in determining the spectral characteristics of filters and feedback structures. In this work, an equivalent apodization model for point-loaded Bragg gratings is developed based on coupled-mode theory and the transfer matrix method. By introducing a spatially varying coupling coefficient, the discrete modulation of the point-loaded grating can be described using a unified analytical model. MATLAB simulations are then performed for both uniform and apodized gratings to examine how different apodization profiles affect the reflection spectrum, with particular attention to sidelobe suppression and spectral characteristics. The simulation results show that apodization can effectively suppress sidelobes and produce a smoother reflection response, while the central Bragg wavelength remains essentially unchanged. Among the profiles considered in this study, the Gaussian function offers a relatively good balance between main-peak reflectivity and sidelobe suppression. This equivalent modeling method therefore provides a practical theoretical framework for analyzing the spectral response of point-loaded integrated Bragg gratings and for further optimization of their performance.

Downloads

Download data is not yet available.

References

[1] Blumenthal, D. J., Heideman, R., Geuzebroek, D., Leinse, A., & Roeloffzen, C. (2018). Silicon nitride in silicon photonics. Proceedings of the IEEE, 106, 2209–2231.

[2] Hill, K. O., Fujii, Y., Johnson, D. C., & Kawasaki, B. S. (1978). Photosensitivity in optical fiber waveguides: Application to reflection filter fabrication. Applied Physics Letters, 32, 647–649.

[3] Erdogan, T. (1997). Fiber grating spectra. Journal of Lightwave Technology, 15, 1277–1294.

[4] Kashyap, R. (2009). Fiber Bragg gratings (2nd ed.). Academic Press.

[5] Lihachev, G., Riemensberger, J., Weng, W., et al. (2022). Low-noise frequency-agile photonic integrated lasers for coherent ranging. Nature Communications, 13, 3522.

[6] Liu, Y., Qiu, Z., Ji, X., et al. (2022). A photonic integrated circuit-based erbium-doped amplifier. Science, 376, 1309–1313.

[7] Halir, R., Cheben, P., Schmid, J. H., Bock, P. J., Wangüemert-Pérez, J. G., Ortega-Moñux, A., Alonso-Ramos, C., Molina-Fernández, Í., & Xu, D. X. (2015). Waveguide sub-wavelength structures: A review of principles and applications. Laser & Photonics Reviews, 9, 25–49.

[8] Kogelnik, H. (1969). Coupled wave theory for thick hologram gratings. The Bell System Technical Journal, 48, 2909–2947.

[9] Cheng, R., Jaeger, N. A. F., & Chrostowski, L. (2020). Fully tailorable integrated-optic resonators based on chirped waveguide Moiré gratings. Optica, 7, 647–657.

[10] Ji, X., Roberts, S., Corato-Zanarella, M., et al. (2021). Methods to achieve ultra-high quality factor silicon nitride resonators. APL Photonics, 6, 071101.

Downloads

Published

2026-10-23

Issue

Section

Articles