Research on Cutting Force based on Thermal-mechanical Coupling Precision Modeling
DOI:
https://doi.org/10.54691/sjt.v4i5.754Keywords:
Constitutive Parameter; Thermal-mechanical Coupling; Cutting Force; Cutting Force Coefficient.Abstract
The accurate establishment of the constitutive model during the cutting simulation is very important. The improved finite element inverse method is used to establish an accurate material constitutive model, the optimal JC constitutive parameters are solved, and the Thermal-mechanical coupling model constructed with ABAQUS is obtained. An accurate cutting simulation model. The output is based on the cutting force in the case of Thermal-mechanical coupling, and it is compared with the experimental measurement values. The simulation values are basically consistent with the experimental values, which verifies the accuracy and feasibility of the model. It also provides reference and guidance for other accurate modeling of cutting simulation.
Downloads
References
Tong Jinglin, Wei Guan. Research on Cutting Force Characteristics of Ultrasonic Elliptical Vibration Cutting Titanium Alloy. Vibration and Shock, 2019, 38 (09): 208-215.
Peng Chenxi, Wu Yunxin, Yi Shouhua, et al. Two-dimensional cutting simulation of 7050 aluminum alloy based on J-C constitutive model. Manufacturing Automation, 2018, v.40 (08): 85-89.
Tang Qi. Determination of JC constitutive model parameters and cutter-chip friction coefficient for 45 # steel cutting residual stress simulation.2015.
Yang Yong, Ke Yinglin, Dong Huiyue. Constitutive Model of Aeronautical Aluminum Alloy Sheet in Metal Cutting. Journal of Chinese Nonferrous Metals, 2005, 15 (6).
Huang Zhigang, Ke Yinglin, Wang Litao. Thermal-mechanical Coupling Model and Finite Element Simulation of Metal Cutting. Chinese Journal of Aeronautics, 2004, 25 (3).
Wang Jingping, He Mingjing. Research on Physical Simulation Technology of Milling Process Based on ABAQUS / Explicit. Mechanical Engineering and Automation, 2015 (1).
Liao Yusong, Han Jiang. Optimization and Experimental Study of Cutting Parameters of 7050 Aluminum Alloy Based on AdvantEdge. Journal of System Simulation, 2015 (7): 1496-1501.
Liu Qiang, Li Zhongqun. Simulation and Optimization of NC Milling Process. Aviation Industry Press, 2011.
Chen Gang, Chen Zhongfu, et al. J-C Damage Failure Parameters of 45 Steel. Explosion and Shock Waves, 2007 (02): 131-135.
Zhao Wei, He Ning, Li Liang. Finite element analysis of orthogonal cutting Ti6Al4V alloy under enhanced cooling. Journal of South China University of Technology (Natural Science Edition), 2006, 34 (7): 40-44.
Yao Yongqi, Guo Yimu, Zhu Ling, et al. Numerical simulation of the effect of friction coefficient on cutting during high speed cutting. Journal of Engineering Design, 2004, 11 (1): 31-36.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
