Optimization Analysis of Distributed Photovoltaic Generation System Design Based on Substituting 50 kW Inverter for 100 kW Inverter

Yulu Wei; Kaige Fu

doi:10.54691/vt23ej53

Authors

Yulu Wei
Kaige Fu

DOI:

https://doi.org/10.54691/vt23ej53

Keywords:

Distributed Photovoltaic Generation; Cluster Inverter; AC Cable; Cost Comparative Analysis.

Abstract

Promoting the whole-county (city or district) construction of rooftop distributed photovoltaic generation is an important part in realizing the two major national strategies of "carbon peak, carbon neutrality" and rural revitalization. In this paper, a distributed photovoltaic generation system design scheme based on substituting 50 kW inverter for 100 kW inverter is proposed for industrial and commercial rooftop photovoltaic projects. Through detailed comparative analysis, it is concluded that the design scheme entailing the use of 50 kW inverters is more economic and cost-effective than using 100 kW inverter.

Downloads

Download data is not yet available.

References

[1] Aviation Industry Planning, Design and Research Institute of China. Industrial and Civil Power Distribution Design Manual [M]. 3rd edition. Beijing: China Electric Power Press,2005.

[2] LI Xiuzhong. Quick Reference Manual of common data of Wire and Cable [M]. Beijing: China Electric Power Press,2010.

[3] GB 50217-2018 Design standard for electric power engineering cables [S].

[4] GB 19964 -2012 Technical regulations for connecting photovoltaic power stations to power systems [S].

[5] GB/T 12325-2008 Power quality supply voltage deviation [S].

[6] China Power Engineering Consulting Group Limited. Manual of Electrical Design for Power Engineering Electrical Primary Design for Thermal Power Plants [M]. Beijing: China Power Press, 2018.