Development and Physicochemical Properties of New Cutting Fluid for Titanium Alloy Machining
DOI:
https://doi.org/10.54691/g59fy033Keywords:
Titanium Alloy; Cutting Fluid; Triethanolamine Oleate; Physicochemical Properties.Abstract
This article focuses on titanium alloy research, using triethanolamine oleate as the lubricating additive, the reaction product of triethanolamine, monoethanolamine and decanoic acid as a rust inhibitor, together with modified organosilicon antifoam agent and triazine fungicide, a new type of titanium alloy cutting fluid with excellent environmental protection and rust inhibition was prepared, and its physicochemical properties were systematically investigated through a large number of experiments. The results show that the prepared cutting fluid meets all specifications and demonstrates promising application prospects.
Downloads
References
L.D. Wang, G.B. Tao and J.L. Zhong: Current Research Situation and Developing Trend of Environmental Cutting Fluids, Journal of Chongqing University of Technology (Natural Science), 2015, 29(04): 44-47+96.
H.Q. Xiong, G.X. Jiang and G.X. Chen: Development of Environmentally Friendly High Performance
Semi-synthetic Cutting Fluid, Lubrication Engineering, 2016, 41(06): 106-112.
X.L. Zhang, X.M. Jia: Triethanolamine and Its Application in Water Base Cutting Fluids, Lubricating Oil, 1999,(05):36-37.
Y.L. Zhang: Preparation of Environment-friendly Water-based Nano-material Cutting Fluids and its Application (MA.Eng, Wuhan Institute of Technology, China 2016), p.9.
W.J. Sun, H. Li and R.X. He: Development of a Total Synthetic Cutting Fluid for Nonferrous Metals, Journal of Southwest University (Natural Science Edition), 2018,40(01):157-164.
X. Xu, W.Y. Xu and Y.F. Hu: Synthesis and Properties of A Novel Modified Polyether Defoamer, Guangzhou Chemical Industry, 2023,51(14):73-76.
L.D. Wang: Research on Efficient Shaving Process And Environmental Protection Cutting Fluid (ME, Chongqing University, China 2014), p.23.
J.Y. Zhu, Q.G. Jiang: Aqueous Cutting Fluid, Bearing, 1994,(12):35-39.
S.F. Li: Study on New Green Water-based Cutting Fluid and its Mechanism (ME, Jiangnan University, China 2008), p.45.
B. Yuan: Study on Preparation and Performance of Semi-synthetic Cutting Fluid (ME, Tianjin University of Science and Technology, China 2016), p.44.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Frontiers in Science and Engineering
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
