Analysis and Control of Technical Errors in Machining Technology
DOI:
https://doi.org/10.54691/m44fdb46Keywords:
Mechanical Products; Processing Technology; Error Analysis; Error Control; Precision.Abstract
Excessive errors in the machining process affect the performance of mechanical products. In the study of analytical machinery.On the basis of the source of technical error in the processing technology, the source of error is determined, mainly including positioning error,machine tool manufacturing errors and tool geometric errors; The corresponding error control methods, including error compensation, are analyzed method, direct error reduction method and error grouping method, and compare; Finally, three error control parties are proposed.Characteristics of the application of the method in different machining. It has reference value for practical work.
Downloads
References
LI Jian. Discussion on Error Causes and Strategies of Machining Technology [J]. China Science and Technology Information,2014(17): 134-135.
JIANG Dunqing. Discussion on the influence of Machining Technology on the machining accuracy of parts [J]. Heilongjiang Science and Technology Information, 2010(16): 7.
Chen Zhi. Analysis of Influence of Machining Technology on Surface Integrity of Parts [J]. Chemical Engineering and Equipment, 2011(12): 111-112.
GUO Xiangdong. Influence of Machining Technology on Machining Accuracy of Parts [J]. Hunan Agricultural Machinery,2013(7): 148-149.
LIU Dongkai. Influence of Machining Technology on Parts Accuracy [J]. Science and Technology Innovation and Application,2013(30): 106.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Frontiers in Science and Engineering
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.