Scraper Point Attitude Optimization in the Scraping Process of Aviation Composite Curved Surface

Quanchao Jing; Zihao Wei

doi:10.54691/bgadnb44

Authors

Quanchao Jing
Zihao Wei

DOI:

https://doi.org/10.54691/bgadnb44

Keywords:

Composite surface, rotation projection, geometric features, curvature.

Abstract

Aiming at the interference problem between the tool and the surface during the contact between the blade position and the composite material during the off-line programming scraping process of aviation composite parts, the contact effect of the blade during the scraping process of the composite surface is discussed, and a rotation projection attitude optimization strategy is proposed. Firstly, by constructing the mathematical model of the contact between the scraper and the surface, the geometric properties of the scraper and its contact on the surface are analyzed. Then, the non-uniform rational B-spline (NURBS) surface is used to reconstruct the surface, and the position information of the local area of the contact point is obtained to obtain the normal direction and curvature. In order to evaluate the contact effect of the scraper, an objective function is defined to minimize the contact error between the scraper linear trajectory and its projection on the surface, thereby quantifying the contact accuracy. By comparing the position and attitude of the scraper before and after optimization, the effectiveness of the proposed optimization method is verified. The optimized scraper posture significantly improves the contact accuracy with the composite surface, better adapts to the geometric characteristics of the complex surface, and ensures the efficiency and consistency of the scraping process. The research results provide a new perspective and method for the future development of automatic scraping process, and also provide an effective solution and technical means for other industries in the application scenario of curved scraping.

Downloads

Download data is not yet available.

References

[1] XU Bin, ZHOU Xinfang, WANG Weihua, et al.: Flexible Robot Gluing System for Aircraft Stringer and Skin, Aeronautical Manufacturing Technology, Vol. 65 (2022) No.19, p.100–106.

[2] ZHANG Weipan, GUO Chunying, Gan Zhichao, et al. Intelligent Glue Robot System Used in Aviation[C]// Chinese Society of Aeronautics and Astronautics. Proceedings of the 2016 Academic Exchange Conference on Aviation Test and Measurement Technology. Measurement and Control Technology Editorial Department, 2016: 3.

[3] Wu Xi: Design and Research of Automatic Squeegee Equipment for Thin-Wall Wings (MS.D., Hebei University of Technology, China 2020), p.1.

[4] Luo Laizhen, Zhao Huan, Wang Hui, Li et al.: Pose Optimization and Tool Path Planning for Robotic Grinding of Complicated Curved Surface, Journal of Mechanical Engineering, Vol. 58 (2022) No.03, p.284-294.

[5] Sun Yuwen, Wu Hongji, Liu Jian: Research on NURBS-Based Accurate Fitting Method for Freeform Surfaces, Journal of Mechanical Engineering, Vol. 58 (2004) No.03, p.10-14.

[6] Wang Hui, Zhao Huan, Luo Laizhen. Research on Quantitative Removal of Adaptive Grinding and Polishing of Aero-Engine Blades Modular Machine Tools & Automatic Manufacturing Techniques, Vol. 2022 No.5, p.28-32.

[7] Zhan Qingrong, Duan Pengfei, Wu Lulu, et al. Robot Trajectory Planning for Surface Grinding Based on Improved Chordal Height Error Constraint Journal of Jiangsu Normal University (Natural Science Edition), Vol. 40 (2022) No.1, p.58-62.

[8] Zhan Qingrong. Robot Grinding Path Planning Of Freeform Surfaces Based on Tool Contact State (MS.D., Anhui Polytechnic University, 2022), p.32.