Research on the Design and Application of Infusion Pump Testing System

Qiuyan Wang; Yuyan Qing

doi:10.6911/WSRJ.202505_11(5).0012

Authors

Qiuyan Wang
Yuyan Qing

DOI:

https://doi.org/10.6911/WSRJ.202505_11(5).0012

Keywords:

Infusion pump, Inspection Systems, Medical equipment.

Abstract

The design and research of infusion pump detection systems is crucial because infusion pumps are precise, consistent, continuous pumps that are pumped into the tool's body based on the actual drug concentration and pumping speed adjustment. This helps to improve the quality of treatment provided by essential medical equipment. This paper discusses the infusion pump detection system in detail, clarifies the infusion pump's structure and working principle, elaborates on the hardware and software design program of the detection system, and uses performance testing to confirm the system's accuracy and dependability. This paper offers a theoretical foundation and practical recommendations for the further optimization and broad implementation of an infusion pump detection system, which is crucial for guaranteeing infusion safety and enhancing the standard of medical care.

Downloads

Download data is not yet available.

References

[1] ZHANG Wenjun, ZIANG Zihao, ZHAO Hongwei. Problems and treatment countermeasures in metering test of infusion pump [J]. China Medical Device Information, 2024, 30(4): 152-154.DOI:10.3969/j.issn.1006-6586.2024.04.050.

[2] HAN Lixi. Research on quality control and testing method of infusion pump syringe pump[J]. China Medical Device Information, 2023, 29(21): 171-173.DOI:10.3969/j.issn.1006-6586.2023.21.054.

[3] Zhang Jianshang. Design and realization of infusion pump/syringe pump detection system [D]. University of Electronic Science and Technology, 2014. DOI:10.7666/d.D627803.

[4] Cui Feiyi, Xia Jingtao, Wang Tingting, et al. Practice of medical equipment management based on quality inspection data [J]. China Hospital Building and Equipment, 2022 (005): 023.DOI:10.3969/j.issn.1671-9174.2022.05.010.

[5] GB 9706.224-2021, Medical electrical equipment Part 2-24: Special requirements for basic safety and basic performance of infusion pumps and infusion controllers[S].

[6] JJF 1259-2018, Calibration specification for medical syringe pumps and infusion pumps[S].